Four different colours for the four different players Introduction A couple of days ago I was playing Halo 4 online when my team mates asked if I could change the colour of an XBOX 360 controller’s LEDs (around the start button). After a few milliseconds of thinking (how difficult can it …
I was recently given a very old, dead laptop. I soon took it apart to see what parts I could salvage, what parts I could reuse in my projects. Among the numerous parts there was one that I was interested the most: the mouse pad or touchpad. I was wondering …
Introduction I have been quite satisfied with the desktop power supply I made from an old PC power supply. My only problem with is that it takes up a lot of space on my desk. I have been long thinking how I could reduce its size and finally I realized …
Introduction The method described below is valid for any remote control that uses conductive rubber pads for buttons. I have successfully used the same method on TV/VCR/Home theater/AC remotes and game consoles. Some time ago I decided that the next time I do it I would document it here. Recently, I ordered …
Introduction This little project was one of my first projects with microcontrollers. First, I made the circuit then, for years, I was wondering what I could do with it, until one day I came across this IKEA plastic bag dispenser. I knew immediately, it would make a perfect “housing” for …
Introduction I usually make a custom PCB for my electronic projects. Throughout development the PCB, however, changes several times. Making a custom PCB at each stage is not practical for several reasons including price, long waiting times between versions and being very wasteful. For all these reasons I use a …
Introduction Ever since I got my first smartphone, I wanted to make a stand/holder for it because most of its time it spends on my desk. There are plenty of smartphone designs available on the net, but I wanted to reuse some pieces of hardware I already had and also …
Introduction “A good technician has 3 hands – it is the fourth one that’s missing sometimes.” I think the famous proverb sums it up: Many times there are many, possibly tiny, parts that need to be balanced in an awkward position with one hand, while using a screwdriver/pliers/tweezers/soldering iron with …