For a long time now I have been longing for a sliding platform for my video camera to take some smooth scrolling panning videos. Also, I have long wished to take proper panoramic images with my SLR. I have had some success using a tripod, but the process was a …
Below I present my own ESP32-S3 development board. The reason for creating my own development board is twofold: Features and advantages This board is using the ESP32-S3-MINI-1 module from Espressif. The board’s features include the following: Schematics Here is the schematics of the development board: Board As usual, I designed …
Since I live in an area where sunshine is almost always abundant, it makes sense to harvest energy from the sun as much as possible. This includes making various sensors around the house, especially the ones that are outside, operate with solar energy. This is usually not a very difficult …
I have long been looking for a way to make a word clock (although there is no shortage of clocks in our home…), but until recently I haven’t found a financially reasonable way to make one. What changed is that I recently acquired a desktop 3D printer. This dramatically expanded …
This article is a new iteration on the wall clock I made a while back. (What can I say? I like LEDs, clocks and clock made up of LEDs…) This time I used a new PCB for driving the circuit and I designed a fully 3D printable enclosure for it …
Introduction With the recent launch of Windows 11 Microsoft also made having a hardware TPM module mandatory. Although this technology is not new (it was introduced in Windows 10 and Windows Server 2016), now, that most people can’t upgrade to Windows 11, it will (slowly) become mainstream. (My personal opinion …
In the following I am going to describe my own version of the light panels that, in my view, eliminate all the disadvantages of the commercial products while keeping all the advantages. I am aware that others have made similar light panels. I am making and publishing my own version, …
The article below is a detailed description of a GPS and GSM based vehicle tracking solution I have created recently. Its major features: Real time location reports using an onboard GSM modem. Has a micro SD card socket for offline storage on a memory card – this way using a …
(This article is updated regularly as I create new development boards. The new ones are towards the bottom of this page.) Over the years I have created several development boards and breakout boards. Despite their cost (time, effort, money) they are invaluable investments for development. They simplify and speed up …
