One side effect of ordering PCBs from a professional fab house is that you always get more PCBs than you actually need. For example, when you place an order for a PCB prototype at PCBWay, you get at least 10 copies of the PCB, sometimes even more. In most cases, …
This article is a new iteration on the wall clock I made a while back. (What can I say? I like LEDs, clocks and clock made up of LEDs…) This time I used a new PCB for driving the circuit and I designed a fully 3D printable enclosure for it …
In the following I am going to describe my own version of the light panels that, in my view, eliminate all the disadvantages of the commercial products while keeping all the advantages. I am aware that others have made similar light panels. I am making and publishing my own version, …
The article below is a detailed description of a GPS and GSM based vehicle tracking solution I have created recently. Its major features: Real time location reports using an onboard GSM modem. Has a micro SD card socket for offline storage on a memory card – this way using a …
Some time ago I also completed this project that I never got around to publish. This project is a WiFi-Infrared gateway. I am aware that such commercial products exist, but at the time I needed one for my home the available options all suffered from one or more shortcomings, such …
I must have thought there were not enough kinds/shapes/etc clocks in the world. Or maybe I thought: “I made one in the eighties, one about 10 years ago, so it is time for another one.” I’m not sure at this stage. What I do know is that I wanted to …
